CC30H
CC 30 SERIES
Item#:
13BC21JD596
From
$ 2,799.00
MSRP
CC30H
CC 30 SERIES
Item#:
13BC21JD596
- A 10.5 HP/344cc Briggs & Stratton engine delivers high-performance power to tackle your yard
- Tuff Torq foot controlled hydrostatic transmission, no shifting - just push the pedal and go
- LED headlight enhanced visibility
- Step-thru frame design provides easier on and off access by providing more leg room
- Ideal size for smaller or gated yards and will fit through most gates with the 30-in cutting deck
- Telescoping steering wheel accommodates any size operator
- 3-year limited residential warranty for peace of mind
You're shopping available inventory from
MUSKOKA RENT-ALL
11 HOWLAND DRIVE,
HUNTSVILLE,
ON
P1H 1M3
Delivering to:
P1H 1M3
|
Availability:
Delivery in
2-4 days
Pick up in
2-3 days
Ships in
8-10 days
Availability:
Delivery in
2-4 days
Pick up in
2-3 days
Ships in
8-10 days
Specs & Maintenance
Engine
- Engine Brand Briggs & Stratton®
- Engine Model Number 21R707-0152
- Engine Displacement 344cc
- Engine Output 10.5HP
- Starter Type Electric
- Fuel Tank Capacity 1.3 gal. US (4.92 L)
- Cylinders Single
- Engine Start Ignition Key
- Engine Oil Capacity 1.5 qts. US (1.42 L)
- Lubrication Fully pressurized
- Charging System 12 amp regulated
- Fuel Gauge No
- Governor Mechanical
- Choke Choke-a-matic
- Oil Filter No
- Fuel Delivery Carburetor
Battery
- Battery 210 CCA
- Battery Type AGM (Absorbent Glass Mat)
- Battery Voltage 12V
Drive System
- Transmission Hydro, Foot (Hydro-Gear T2HP)
- Forward Speed 4 MPH / 6.4 KMH
- Reverse Speed 2 MPH / 3.2 KMH
- Rear Axle 3/4"
- Drive System Hydrostatic
- Transmission Control Foot Pedal
- Transmission Housing Cast aluminum
- Rear Differential Lock No
Cutting Deck
- Deck Cutting Width 30 in
- Deck Wash Yes
- Deck Material 14-gauge steel
- Deck Engagement (PTO) Manual
- Deck Construction Stamped
- Blade(s) 1
- Deck Lift Manual
- Cutting Height Range 1.5" - 4"
- Anti-Scalping N/A
- Deck Positions 5
Chassis
- Frame Robotically welded
- Front Axle Steel
- Turning Radius 18"
- Bumper Steel Tube
- Rear Tow Hitch Yes
- Corrosion Protection Yes
- Front Pivot Bar Steel
Controls
- Cruise Control No
- Brakes Disc
Comfort
- Seat Type 15" High-back
- Armrests No
- Seat Adjustment Knob
- Floor Mats Intergral
Wheels
- Bearing Type Poly Bushing
- Rear Tires 16" x 6.5"- 8”
- Front Tires 13" x 5" -6”
- Tire Tread Turf Saver
Additional Specifications
- Mulch Kit Included
- Headlight(s) LED
- Cup Holder Yes
- Operator Presence System Yes
- Model Number 13BC21JD596
Warranty
- Residential Warranty 3-year limited
- Commercial Warranty No
Disclaimers
- Specifications Specifications subject to change without notice and without incurring obligation. Products depicted on website and other advertisements are for demonstration purposes only. Actual products offered for sale may vary in design, required attachments, safety features and non-functional appearance from. See other general disclaimers at the bottom of our website.
Product Reviews
Rated 3 out of
5
by
ChristaD from
Engine is hard to start
I have owned a couple of Cub Cadet 30-in lawn tractors over the last 25 years and they have been exceptional.
Bought this newer model in Sept' 2024 and I am not impressed.
The engine and battery are smaller than on my previous units and this newer one is harder to start. It sputters a lot until it warms up and does not have the power of my older models.
Am going back to my older model and selling this one.
Quality is not what it used to be. Disappointing.
Date published: 2024-10-25
Rated 2 out of
5
by
mark204 from
i like it BUT
i got one of these this year and i do like it and it is a good size for my yard but it will not cut even. sitting on it on the left side its like the wheel flattens the grass down and the blade will not cut it so i end up with a strip that will not cut. i have had it to the dealer 4 times and even they don't know why its doing this. i just want it to cut properly so i don't have to cut my lawn 2 times to get it even.
Date published: 2024-08-14