Update November 15, 2024. Due to the current Canada Post disruption, order delivery may be delayed, or in certain areas, such as rural locations, not available at this time. We apologize for any inconvenience this may cause.
Changing Gas on a Cub Cadet Walk-Behind Mower
Length of clip: 01:00
This video will show you how to change the gas on a Cub Cadet walk-behind mower. Depending on your model, the instructions in this video may vary slightly. Always be sure to check your operator's manual for detailed instructions.
Instructions
- Step 1
-
Remove the spark plug ignition wire.
- Step 2
-
Unscrew the gas cap.
- Step 3
-
Using the Siphon Pump, place the orange tube into the gas tank on the engine and the black tube into a proper container.
- Step 4
-
Prime the pump by pumping the handle three or four times. Once the liquid begins to flow, it will continue flowing without further pumping.
- Step 5
-
Remove the Siphon Pump and add new gas.
- Step 6
-
Replace the gas cap.
- Step 7
-
Reconnect the spark plug ignition wire.
- Step 8
-
Dispose of the gas properly.